Mildly alkaline liquid caustic additive which contains highly
complexing, sequestering and special wetting and foam suppressing
Prior to use FL-5, Bottle washer must be free of scale or descaling.
FL-5 is very effective caustic additive for removing of mould and fly
larvaes from the glass bottles.
0.4-0.6% of FL-5 was recommended to add into 2-3% caustic
solution at temperature 75-80o
In case of light soil deposit in the bottles, the concentration of FL-5
can be reduced to 0.2-0.4%
- Improve cleaning performance in bottle washing.
- Prevents / reduces the formation of foam above 55oC
- Prevents scale formation in bottle washer.
- Excellence soil suspending properties.
- Accelerates the removal of label and decomposition of aluminium foils.
Liquid caustic additive for single phase CIP in the food processing
industries. FL-7 contains highly complexing, sequestering special
wetting and foam suppressing agents.
Usage concentration of FL-7 is depended on the level of water
dH required 0.025% of FL-7.
FL-7 can be used as an additive to strong alkaline products ;
HT-50 or HT-20 for improvement of CIP performance.
For cold milk area ; Milk reception tanks , Tanker and cold milk
pipe lines. Single phase cleaning can be obtained by using
0.4-1.0% FL-7 plus 2-4% HT-50 circulation at 70-80o
C for 20-30
minutes.(No acid CIP required)
For milk pasteurizer and UHT units ; FL-7 can be applied as the
additive to alkaline products (HT-50) during alkaline washing
step. Generally 0.4–0.8 % of FL-7 is recommended in additional
of 2-4% HT-50 with circulation time of 30-45 min. at 85-900C.
FL-7 can be feeded via the metering pump in the proportioning
ratio to alkaline products (Dosage control by conductivity)
- Improve cleaning performance.
- Exellence soil penetration & suspension.
- Saves time and labor.
- Cleaning cost saving.
- Environment friendly.